Skip to content
Expandable home on a lawn, flax, cabbage trees and green hills behind

Real photos at the factory

Unit of the same model, wings expanded, timber-look cladding and glass sliding door
Unit of the same model in white, wings expanded, central glazed doors
Unit of the same model, dark timber-look cladding, three-quarter view, gable roof option
Unit of the same model with the gable roof and front deck options, pergola frame shown without its cover
Living area of a unit of the same model, doors to the bedrooms
Unit of the same model built for Australia: living area, ceiling light fitted, doors to the bathroom and bedrooms
L-shaped kitchen in a unit of the same model, white cabinets, sink and tap still wrapped
Unit of the same model built for Australia: L-shaped kitchen with wall cabinets, sink not yet fitted
Bathroom of a unit of the same model: shower, basin and toilet
Unit of the same model built for Australia: bathroom with sliding shower door, basin, toilet and mirror cabinet
Bedroom of a unit of the same model, sliding window, ceiling light not yet fitted
Unit of the same model built for Australia: bedroom with two windows
Technical details (4)
Power points fitted at the factory in a unit of the same model built for an Australian customer
Unit of the same model: connection points under the floor, waste outlets and hot and cold water inlets
Unit of the same model: tie-down ring bolted to a corner post of the steel frame
Unit of the same model prepared for shipping: kitchen cabinets packed and strapped, doors under film
Silent video: walk-through of a unit of the same model built for Australia, at the end of production: living area, kitchen, bathroom and bedrooms
Footprint plan from the manufacturer's dimensions

All photos and the video show the same 20 ft expandable model, in units our manufacturer built for Australian customers. New Zealand uses the same power points (AS/NZS 3112), but the New Zealand version adds a thicker insulated roof for clause H1, which these photos do not show. Your specification is confirmed in your quote.

More units from the same manufacturer

Photos and videos of other expandable units by our manufacturer, built for other customers: sizes, layouts and finishes vary. The furniture is for display and is not supplied. They are not photos of your unit; your version is confirmed in your quote.

360° tour of a manufacturer's show home

Living area

Drag to look around; use the wheel, a pinch or the + and − keys to zoom.

Silent video: Wings expanded and folded back by hand, by a small crew in the factory yard: five units of the same type
Silent video: Finished units at the manufacturer: cladding, glazed doors and deck
Silent video: Finished interiors and finish samples
Silent video: Manufacturing: robotic welding of steel chassis, window frames, panels wrapped for shipping
Living area furnished for display: sofa, glass coffee table, plants
Furnished living area with French doors to the outside
Furnished living area of a 20 ft unit: sofa and coffee table
Furnished living and dining area
Dining corner under two black-framed windows
Dining corner with a round glass table
Living space with a large table and coloured doors
Bedroom in use, black-framed window
Entrance and French door to the deck
Hallway to the glazed doors and the deck
French doors and window, timber-look floor
Entrance room and interior door, empty unit
Large empty living space, timber-look floor
Living space with the kitchen at the back, empty unit
Living space and bathroom pod, empty unit
Living area and bedroom doors, grey floor
Empty living space in daylight
Empty bedroom, windows on two walls
L-shaped kitchen under two windows
L-shaped kitchen and bathroom door
Kitchen units open: drawers and cupboards
White kitchen units, stainless steel worktop
Bathroom with grey marble-look walls: basin, toilet, glazed shower
Grey bathroom: vanity unit and glazed shower
White bathroom: shower, toilet and vanity unit
Compact bathroom behind a glazed door
Bathroom: vanity unit, mirror cabinet, toilet
Shower column, non-slip shower tray
Frosted glass bathroom door
Sliding window with insect screen, black frame

Get a quote for this unit

The unit

Yard 37 travels folded, 2.2 m wide, and expands on site to 5.9 × 6.3 m. Only the external walls fold: there are no loose panels to assemble.

Inside, you get two bedrooms, a living area with kitchenette and a separate bathroom, all finished at the factory.

Two finishes share the same steel frame. Standard has 75 mm wall panels. Premium has 100 mm panels, an upgraded kitchen and bathroom, and two extra windows. The New Zealand version adds a thicker insulated roof and an insulated floor for the H1 energy rules.

Near the coast, the fluorocarbon (PVDF) frame coating option extends service life in salt air.

Shipping

Folded, two units travel end to end in one 40 ft High Cube container, so a pair shares the freight. After customs and biosecurity clearance, the crane sets the unit on its foundations; truck and crane are included in metro Auckland.

Approvals in New Zealand

A new, stand-alone, single-storey home of up to 70 m², measured between the inside faces of the external walls, can be built without a building consent if every condition of the granny flat exemption is met. It must still comply with the Building Code.

Two questions are open with MBIE (asked on 23 October 2026): whether a home built overseas can use the exemption, and whether the Yard 37's bolted steel frame counts as a lightweight steel frame. Until MBIE answers in writing, we take no deposit for a project that relies on the exemption. If you do not want to wait, your project can go through a building consent instead: your quote then shows the consent fees and the extra time.

Every exempt granny flat needs a PIM from your council, and no building work may start before it is issued; the New Zealand designer named in your quote certifies the design.

General information, not advice for your section. See standards and approvals.

Specifications

Reference unit, from the manufacturer's quotation of October 2026. Every item is confirmed in writing in your quote.

Size and weight
Expanded (L × W × H)5,900 × 6,300 × 2,480 mm (current version; the Australian version with 2.4 m ceilings is taller, its height is confirmed in your quote)
Folded for transport5,900 × 2,200 × 2,480 mm (current version; height of the Australian version confirmed in your quote)
Internal clear5,740 × 6,140 × 2,260 mm
Floor area35.2 m² between the inside faces of the external walls (37.2 m² overall)
WeightAbout 2,500 kg
Structure
FrameGalvanised, powder-coated Q235 steel, bolted, stainless fixing bolts
Main sectionsColumns 150 × 210 × 3.0 mm; top beams 80 × 100 × 2.5 mm; corner castings 4.0 mm
Coastal optionFluorocarbon (PVDF) frame coating, recommended near the coast
Structure for New ZealandStructural drawings and calculations supplied for your New Zealand designer or engineer, who designs foundations and anchorage to NZS 1170.5 and AS/NZS 1170.2
Envelope
Wall panelsStandard: 75 mm EPS sandwich, 0.35 mm colour steel both sides. Premium: 100 mm EPS (75 or 100 mm PU or rock wool available)
RoofNew Zealand version: thicker insulated roof, specification confirmed in your quote (the Australian 50 mm panel is below the H1 minimum)
Windows and doorThermal-break aluminium, double glazed, flyscreens; thermal-break aluminium entry door
FloorCement board and bamboo plywood with PVC wear layer, and floor insulation of at least R1.3 (the H1 minimum for a suspended floor); SPC click flooring in the finish schedule
CladdingEmbossed metal panel (stone-finish paint as an option)
Services
Electrical230 V single-phase installation wired at the factory to AS/NZS 3000, RCD/RCBO protection; assessed by a New Zealand electrical inspector before connection (record of assessment), with a supplier declaration of conformity prepared for your signature as the importer; 13 power points, 5 switches, 6 lights
PlumbingFour labelled connection points (cold, hot, grey water, sewer); layout checked against the exemption's plumbing conditions
BathroomSeparate wet area: ceramic WC, basin, mirror cabinet, shower
KitchenetteCabinets, stainless sink, stone benchtop
Smoke alarmsInterconnected alarms supplied and pre-wired; model confirmed with your designer for clause F7
Written warranty from Lodgeyard (in addition to your consumer guarantees)
WarrantorLodgeyard, a brand of REXOR GROUP LLC, 8206 Louisiana Blvd NE, Ste A #9493, Albuquerque, NM 87113, USA · contact@lodgeyard.com · backed by the manufacturer's warranty. Periods run from delivery to your section; how to claim is in our terms
Whole unit12 months, materials and workmanship
Steel frame10 years with the PVDF coating option
Roof and wall panels5 years
Windows, doors, electrical and plumbing components2 years
Your consumer guaranteesLodgeyard gives these warranties in writing in your quote. They add to your guarantees under the Consumer Guarantees Act 1993, which cannot be excluded when you buy as a consumer.

Included in your quote

  • Unit finished inside at the factory; seals, sealant and small fittings travel inside it and the Licensed Building Practitioner fits them when expanding it
  • Asbestos test reports from an accredited laboratory, plus independent pre-shipment inspection
  • Progress photos during the build
  • Sea freight and delivery to your section by truck and crane in metro Auckland
  • Site works in the turnkey price, by the designer, Licensed Building Practitioner and licensed trades named in your quote, under their own contracts with you: design, foundations and anchorage, expansion, plumbing, drainage, hot water, electrical inspection of the factory wiring (record of assessment) and connection, certificates, and an insulated floor of at least R1.3. Council and Watercare charges, counted in the turnkey price, are paid by you directly
  • Electrical import dossier and fitting declarations checked before your order
  • Structural drawings, wiring and plumbing documents for the designer and trades

Options

  • Premium finish
  • PVDF coastal frame coating
  • 100 mm EPS, or 75 or 100 mm PU or rock wool panels
  • Gable roof
  • Front deck

Your side of the project

  • Applying for your PIM with the designer named in our proposal, before production starts: the designer's fee for this stage and the council's PIM fee are the first part of the site works total, paid directly before your final quote
  • Your consent pathway, confirmed in writing before any deposit: the granny flat exemption once MBIE has answered our question (open since 23 October 2026), or a building consent
  • Paying council and Watercare charges directly: the price on this page uses a typical Auckland suburb, your quote uses the amounts for your address
  • A separate electricity connection, only if your section needs one for the exemption: confirmed by your designer and priced in your quote
  • Truck and crane access to your section, checked with you before the quote
  • Sending the completion documents to your council within 20 working days, and insuring the unit once delivered

From the factory to your section

Seven steps, and at each one something you can check: drawings, photos, reports, tracking.

See every step
  1. Steel frame post and its bolted joint, in the workshop
    Step 1

    Building the frame

    Galvanised steel frame, cut, welded or bolted and assembled at the factory to approved drawings, once your PIM is issued.

  2. L-shaped kitchen in a unit built for an Australian customer, sink and tap still wrapped
    Step 2

    Envelope and fit-out

    Insulated panels, windows, wiring, bathroom and kitchenette, all fitted at the factory.

  3. Australian power points fitted at the factory
    Step 3

    Independent inspection

    Before shipping, an independent inspector checks every unit, with a written report and photos.

  4. Unit prepared for transport, at the factory
    Step 4

    Loading

    Units wrapped, braced and loaded under supervision, container sealed.

  5. Container ship at sea
    Step 5

    Sea freight

    Shipping booked by our freight forwarder, with cargo insurance.

  6. Lashing ring bolted to a corner post
    Step 6

    Delivery to your section

    Customs and biosecurity clearance, then truck and crane onto the foundations: included in metro Auckland.

  7. Expandable home on a lawn, flax, cabbage trees and green hills behind
    Step 7

    Installation and handover

    Fixing and connections by the LBP and licensed trades named in your quote, part of the turnkey price; documents to your council within 20 working days.

Your project

Get a quote

Tell us about your section. We reply by email with a first look, then a written quote that lists what is included, what is not, and the costs paid at the border.

Or email us: contact@lodgeyard.com

Nothing is payable to us before your PIM is issued and your consent pathway is confirmed in writing.

We use your details only to look at your project and prepare your quote. See our privacy policy.

Other units

Yard 57

Two bedrooms, a separate living room with kitchenette and a full bathroom in about 54.3 m² inside the walls (56.7 m² overall), shipped folded and expanded on your section.

  • Floor areaAbout 54.3 m² inside the walls (56.7 m² overall)
  • Bedrooms2
  • Size9.0 × 6.3 m expanded
Turnkey from NZD 230,000Unit delivered by us; site works by the designer, Licensed Building Practitioner and trades named in your quote. Metro Auckland.View details