Yard 37
Two bedrooms, a living area with kitchenette and a full bathroom in 37.2 m².
- Floor area37.2 m²
- Bedrooms2
- Size5.9 × 6.3 m open
From AUD 45,700 all-inAll-in: delivery, GST and import chargesView details
The unit
Yard 57 is the largest unit we offer for NSW granny flats: 9.0 × 6.3 m open, 56.7 m², inside the 60 m² limit for a secondary dwelling. It has two bedrooms, a separate living room with kitchenette, and a full bathroom.
Like Yard 37, it ships folded and finished inside. It fills one 40 ft High Cube container.
Shipping
One unit per 40 ft High Cube container.
Approvals in NSW
A granny flat is a Class 1a dwelling under the National Construction Code. Under the State Environmental Planning Policy (Housing) 2021, it can be approved as complying development only if every standard is met, including a lot of at least 450 m² and a floor area of 60 m² or less; otherwise a development application is needed.
General information, not advice for your block. See standards and approvals.
Specifications
Reference unit, from the manufacturer's quotation of October 2026. Every item is confirmed in writing in your quote.
| Open (L × W × H) | 9,000 × 6,300 × 2,480 mm |
|---|---|
| Folded for transport | 9,000 × 2,200 × 2,480 mm |
| Internal clear | 8,840 × 6,140 × 2,260 mm |
| Floor area | 56.7 m² |
| Weight | About 3,800 kg |
| Frame | Galvanised, powder-coated Q235 steel, bolted, stainless fixing bolts |
|---|---|
| Main sections | Columns 150 × 210 × 3.0 mm; corner castings 4.0 mm |
| Coastal option | Fluorocarbon (PVDF) frame coating, recommended near the coast |
| Wind class | AS 4055 N2 and N3 structural drawing sets and calculation reports supplied; certified for your site by an Australian engineer |
| Wall panels | Standard: 75 mm EPS sandwich, 0.35 mm colour steel both sides. Premium: 100 mm EPS (75 or 100 mm PU and rock wool available) |
|---|---|
| Roof | 50 mm sandwich panel, sloped, with eaves (75 mm or gable roof as options) |
| Windows and door | Thermal-break aluminium, double glazed, flyscreens; thermal-break aluminium entry door |
| Floor | Cement board and bamboo plywood with PVC wear layer; SPC click flooring in the finish schedule |
| Electrical | 230 V single-phase components specified with SAA approvals, wired to AS/NZS 3000 practice, RCD/RCBO protection |
|---|---|
| Plumbing | Fittings specified as WaterMark-certified; four labelled connection points (cold, hot, grey water, sewer) |
| Bathroom and kitchenette | Separate wet area with WC, basin, shower; kitchenette with stainless sink and stone benchtop |
| Smoke alarms | Interconnected alarms specified to AS 3786, supplied and pre-wired; model confirmed with your certifier |
| Whole unit | 12 months, materials and workmanship |
|---|---|
| Steel frame | 10 years with the PVDF coating option |
| Roof and wall panels | 5 years |
| Windows, doors, electrical and plumbing components | 2 years |
Included in your quote
- Unit finished inside at the factory
- Asbestos test reports from a NATA-accredited laboratory, plus independent pre-shipment inspection
- Production photo reports during the build
- Sea freight and truck delivery to your site
- Structural drawings, wiring and plumbing documents for your certifier and trades
Options
- Premium finish
- PVDF coastal frame coating
- 100 mm EPS or 75 mm PU panels
- Gable roof
- Front deck
Your side of the project
- Certificate copies (electrical approvals, WaterMark, structural drawings) checked against the issuing bodies before your order
- Approval pathway for your block: complying development or development application, and BASIX
- A licensed builder for installation, and footings certified by an Australian engineer
- Connection by your licensed electrician and plumber
From the factory to your backyard
Seven steps, one point of contact, and at each step something you can check: drawings, photos, reports, tracking.
Step 1Building the frame
Galvanised steel frame, cut, welded or bolted and assembled at the factory to approved drawings.
Step 2Envelope and fit-out
Insulated panels, windows, wiring, bathroom and kitchenette, all fitted at the factory.
Step 3Independent inspection
Before shipping, an independent inspector checks every unit, with a written report and photos.
Step 4Loading
Units wrapped, braced and loaded under supervision, container sealed.
Step 5Sea freight
Shipping booked by our freight forwarder, with cargo insurance.
Step 6Delivery to your block
Customs clearance, truck to your site, crane lift into place.
Step 7Installation and handover
Footings, connections by licensed trades, full document set.
Your project
Get a quote
Tell us about your block. We reply by email with a first look, then a written quote that lists what is included, what is not, and the costs paid at the border.
Or email us: contact@lodgeyard.com